To do it, follow these steps: Disarming the alarm – This is the first step that is very essential if you are to change the battery on the ADT alarm panel without causing a lot of trouble yourself. While the specifics of this process may differ from one model to another, it is pretty easy to understand that the basics of this process should not pose a problem for the majority of homeowners who would like to carry out this task on their own but with proper preparation and attention to details.
Why Change the Battery?
This battery is installed inside the ADT panel and gives the system power if there is a power failure. It ensures that the system remains functional and can detect intruders and trigger an alarm during a blackout on the main power supply. One day like any other battery, that which is holding your panel will also develop a weak holding ability or capability of holding charge and then will need to be replaced. They suggest that it should be changed at least every 3-5 years therefore ADT recommends proactively replacing it. Delays will only mean that the battery will be drained at the worst of times when you need your security system most. Performing it regularly helps protect the likelihood of having dependable operations.
Get the correct Replacement Battery
To perform the following operations, you buy the correct replacement battery first. The ADT alarm panels have a 6 or 12 V rechargeable sealed lead acid battery which is as big as a pocket-sized paperback. Check with your car’s manual or other technical documents to confirm the correct type and measurements for your panel. To avoid buying the wrong battery, unscrew the top of your existing battery and take a quick look if you do not have any manuals with you, then decide whether to order one online or go to the nearest hardware store or home improvement store. Ensure that the new battery is of the same voltage, dimensions, terminals, and in all other respects as the battery you are replacing so that it slots into your panel and functions as intended. Do not go for cheap batteries that may have low quality or those with no brand name which might have some defects. An ADT-branded battery will always be ready if you still have your system professionally monitored but other aftermarket choices that meet the stated specifications will also be satisfactory.
Prepare Tools Replacing it with a new battery does not even call for many tools on your side. Have the following on hand before getting started: Have the following on hand before getting started: Protective glasses for your eyes to avoid any accident occurrence. Another important accessory is the gloves that will help avoid any direct contact with the battery acid if by any chance it spills. It is assumed that a flashlight will be needed to see inside the panel. The screwdriver or key used to unlock a certain style of panel’s door might be required A rag or paper towel for whatever unexpected cleaning may be required Optional double-sided tape if your replacement battery does not come with adhesive foam sticky pads already attached to its bottom part
Take Precautions
Whenever you interact with the inner settings of your ADT panel, caution is warranted as it could be precipitating the extremely loud alarm siren or sending signals. Hence, it is advisable to turn off both the main and the backup power source before venturing any further into the process. The first AC power cord for the system should be located on the front of the system and should have a plug that can be disconnected from the outlet. Be sure to make all the members of your household understand that you will for some time disconnect the security system to avoid being panicked by the absence of the network. Disconnecting the present battery (described next) also stops the backup power supply simultaneously at the same time.
Remove the Old Battery
The following procedure is to remove the existing battery to make way for a new one you want to insert. Panel doors are usually locked and in case you need to access it, then ensure to unlock it gently without triggering alarms since you disconnected the power supply. Once inside, find the battery located within and trace along the screw terminal along the clip that holds it in position. It is recommended that one take note of the wiring configuration that is connected to the existing battery before they proceed to do any more interference. Disconnect the battery by releasing the hooks, if any, remove adhesive pads or brackets that may be present, and then take out the battery without pulling the cords roughly. Put it aside on your rag or paper towel in case more acid drips out after washing. Check the state of the connections for any signs of corrosion and remove them so that the new battery shows a good connection.
To do this, it is necessary to connect and mount the replacement. With the old battery out of the way, you can now put your fresh new battery back in; it is wise to make sure that you put it in a way that no wires will be pinched inadvertently. And if the screw or clamp is used to fix it then you have to reattach them again, reconnect the battery leads and apply double-sided tape on the bottom if your panel needs a sticky pad to be mounted instead of a fixed bracket. Organize the connections back to how they were originally located on the old battery. If you have previously documented the car before disassembling it, then it is very easy to find out what is missing and what needs to be replaced. However, make sure to align the items correctly to avoid confusion even if it is double-checked. If using tape then press on the battery for 30-60 seconds to allow the stickiness of the adhesive to grip well.
Check and verify that power has been restored and that the operation has been normal. After ensuring that the replacement battery is within your ADT alarm panel, the last process is to switch the system back on and as a confirmation that it works normally. First, reconnect the AC power cord to the wall outlet so that the panel again becomes dependent on the main power. It may take some time for the system to restart or shut down and then resume operations. Subsequently, connect the battery itself so backup power is on as well to meet the demand of loads. Wait for any tone that may be produced which implies that the machine or gadget is working properly. The beeping sounds depend on the model, although many emit quick beeping. Physically, check the entire panel to identify any sort of diagnostic light, message, or alert that may indicate problems with your brand-new battery. Indications should be back to normal standby state concerning all the above-stated parameters. Make a brief walking test to also confirm that the security system operates correctly and feeds power to the battery when you disconnect the AC cord once again. Lastly, shut the panel door and engage the system to ensure it is actively on and not showing any blinking green lights in your house. Congratulations on the battery replacement you have accomplished on the appliance!
Optional System Battery Test In addition to the utility for swapping out the battery, some ADT panels are equipped with an additional option to perform a formal check of backup battery operation. You can use the relevant information in your owner’s manual to learn more about the model-specific test procedures. Sometimes, you press one of the buttons for more than half a minute to activate the mode and let the device go through an automatic sequence of turning off the mains power and switching to battery power to monitor and sound the alarm, then returning to the normal mode and reconnecting to the wall socket after 1 min+. This sequence verifies that the carefully installed new battery will operate as expected when normal power is absent.
If you need a professional battery change, you can order one from us. Even though battery replacement is easy for any DIY homeowner, you can always request an ADT technician to do it since they can always replace the batteries for the system professionally to ensure the best performance. Taking your vehicle for service also enables the proper disposal of the existing battery so that harmful materials do not find their way into a landfill. However, if you still have your system monitored by the firm that installed it, particularly if it is ADT, you may not have to pay much when changing the battery since it might be under warranty. Please consult your current customer agreement since this is a topic where the specifics sometimes vary.
This should give a general idea of how most ADT alarm panels’ backup batteries can be replaced. Just a few safety measures, enough preparations, and meticulous execution will allow you to perform a safe and successful DIY battery replacement that will ensure your system continues to monitor your home for as long as you want. If you stick to the advised 3-5 years replacement rate for your bulbs this home security solution will be worry-free.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
