In this tutorial, I will be showing you how to change your ADT alarm passcode. In this case, it can be stated that it is crucial to always have a good home security system to protect your family and property. If you use an ADT alarm at home, one of the most important security features would be the ability to change the passcode for the system to prevent anyone from arming and disarming the system without permission.

If you have an ADT alarm system, it’s advisable to change its passcode from time to time to enhance safety. It is going to change this sensitive access code so that no one who used to know your previous password will be able to manipulate your system in the future without your consent.

It seems common to change the ADT alarm passcode, which often takes no more than several minutes. However, the process of disarming or turning off the ADT alarm system and keypad varies depending on the type of ADT alarm system and keypad that you have installed in your home. In this piece, we will outline the normal or basic procedures on how to change the existing passcode to a new one for usual ADT alarm systems and keypads.

Conditions That You Must Fulfill For Resetting Your Passcode Before going through the passcode change process, there are a few important prerequisites to confirm first: Before going through the passcode change process, there are a few important prerequisites to confirm first:

To be authorized and get to the submenu or function that allows you to change the passcode, you have to know your current/old passcode. If you have lost your old passcode then to enter your ADT home security system you might have to call customer support to verify your identification and then you will be given a temporary one-time passcode.

As you would expect, the passcode can only be changed when your system is disarmed. The passcode change function is not active when your ADT system is armed and you can’t change the passcode in this situation.

This should also be done before they issue you with a new passcode. It has been estimated that the majority of ADT panels employ four digits. Do not use repetitive configurations or sequential numbers to enhance security.

The keypad will lock up in a short time while trying to enter the programming menus. Once one starts moving through the process, do so with a lot of efficiency.

If you’re an ADT alarm user who needs to change your passcode, here are the steps that you can follow: Here are the general steps to change your existing ADT alarm passcode to a new one: Here are the general steps to change your existing ADT alarm passcode to a new one:

  1. Please, input your current passcode into the Keypad. First, you should input your old 4-digit ADT alarm code on the keypad and then press the pound (#) button. This will log you in without showing any output and immediately take you to the main menu.

  2. The method to change the passcode is available by pressing Press 1 on the keypad. With the main system menu displayed on the screen, you now want to use the keypad and type the number 1 to select the passcode change.

  3. Enter A New Passcode Twice For Confirmation After that, you will be asked by the system to type in your new passcode options. You are prompted to enter a new 4-digit passcode that you would like to use, and you should repeat the new preferred code on the next line.

  4. Remember New Passcode in System Memory If everything is correct, your ADT keypad should show a message saying that the programming was successful after you have input your new passcode twice. Once you complete the process, your new passcode will be stored in your alarm system and available for use.

  5. New Passcode to Check System’s Efficiency However, it is essential to verify the functionality of your freshly set passcode before proceeding with the process. It is necessary to arm and disarm the system several times to check its readiness for functioning. Consult with the ADT support team in case you encounter any problems with the new passcode in your unit.

  • It is also advisable to avoid using personal information that might be easily identifiable such as birth dates.
  • These are not preferred number patterns and should not be used when selecting the combination of four numbers, for example, 123 and 5555.
  • Better still, write it down in the center of your palm so you may easily memorize it and not have it in writing where intruders could easily get hold of it.
  • It is recommended to modify your passcode as often as in several months to ensure maximum protection for your data.
  • Avoid disclosing the passcode of your alarm system to people who are not a part of your home, including guests.

By adhering to these tips, it will be possible to make sure that even if the ADT alarm passcode is displayed or heard by a third party, they will not be allowed access to it. To break it down, some of the easiest and uninterruptible ways of strengthening the sense of security include taking a few minutes to change the home security system passcode from time to time.

ADT Alarm System Types The steps that you need to follow to change the passcode of your ADT security system may vary slightly depending on the type of system you have in your home. Here is some information on a few common models: 

ADT Command Panel ADT Command systems are comprehensive home security systems keypad that has a touch interface. Modifying the passcode involves going through several Command touch menu prompts to achieve the desired change. Archiving instructions are included in the help section of your panel.

ADT Control Panel CD also known as control panels are the ADT alarm systems with separate keypad devices. They are usually comprised of models such as the ADT Safewatch Pro 3000. The last mechanism, which is passcode change, can also be accessed by the keypad buttons whose actions were discussed in this article.

ADT Pulse Panel In particular, with Internet-connected ADT Pulse systems, the passcode can be changed through the Web or the ADT mobile application. You can still get to the Pulse passcodes and change them directly at the panel keypad through the change passcode function.

By so doing, we are sure that people using ADT will be able to get assistance from ADT support within the shortest time. If you ever experience any challenges in the process of changing your ADT alarm system passcode, then you can always call the support team through the phone number, engage in a chat, or get in touch with them through e-mail as they are available at all hours of the day and night. To this end, ADT will be able to take other measures to confirm ownership of the accounts, as well as provide one-time bypass codes where the need arises.

Summary New passcode security is an important part of your ADT-monitored security plan that you should not take lightly. A simple measure that any homeowner can take is to spend 5 minutes at most to change the existing passcode of the home alarm system once in a while to ensure safety is at its peak. Do not forget to memorize the new 4-digit code and make sure not to share it with anyone who has no right to access it as it will help you to be safe. Resetting passcodes at times on the ADT alarm is a measure that can help strengthen security in a household in the long run.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!