Perhaps resetting the password for your ADT alarm system can help enhance security in your home since it would be harder for intruders to disarm the alarm system. Another reason can be the frequency of changing the password, as this code can be received by everyone, and everyone can guess it. Resetting the password is often a straightforward process that can be done directly from the keypad of your home’s alarm system.

First of all, you will be required to enter your Master Code on the keypad to gain access to the system. It may be a four-digit code that provides the user with full control of the settings of the particular gadget. If you are not certain of the Master Code then you are free to contact ADT customer support which will give it to you once they have confirmed your identity. Once you have your Master Code ready, follow these steps to change your ADT alarm password: 

  1. Your first step is to go to the keypad of the alarm system and then set the4-digitt Master Code. In most of the models, the keypad will give out a beep sound and the ‘Ready’ light will appear to notifyyou that you have entered the programming mode.
  2. Dial the ‘8’ on the numeric keypad. This leads you into the user management area of your system programming.
  3. Type a 2-digit user number you wish the code to be associated with. This tells which user code is to be changed or preferred by the system. For instance, if you type ‘01’ that means you wish to program the main user code.
  4. Once again, input the new 4-digit code you wish to use and input it once again. Ensure your new code is not an old code or a duress code that is likely to be hacked by intruders. Your system shall beep after every 4 digits they enter.
  5. When finished, press the ‘Off’ or ‘Exit’ key, depending on the machine you are using. The panel will also beep to indicate that the new user code has been approved.

However, ensure that the new four-digit password to be set cannot be guessed easily. When you code in the same way or use numbers like ‘1234,’ you create security loopholes for hackers to exploit. You will also not wish to write down the new code as it will be preferable to memorize it.

Tips for Choosing a Secure Alarm Code: 

  • Try to avoid repeating digits like 1 or 4 in a sequence like 1111 or 1234.
  • Never write birthday or anniversary in phone numbers.
  • Select an arbitrary string for higher protection
  • Make sure there is a different alarm code from the previous one.
  • When it comes to choosing the type of alarm, do not tell anyone the code of your house alarm except your family members.
  • Make sure you don’t need to write it down…so choose a code that you can easily remember.

In most cases, we suggest that you change the code of your ADT alarm system every 6-12 months. This can assist in preventing the disarming of the alarm system using an old or a jammed decoder as the case may be. It can also deny access to the system, to the past homeowners or members of the house, if they know the existing code for the system.

In some instances, ADT will ask you to alter your alarm system code such as if they are changing their security measures. They can hold your hand guiding you through prompts of a particular system that requires an update. But as for the password of your home alarm, you do not needto waitg for the notice from ADT to change it as wanted.

Programming Additional User Codes:

I am fairly certain that your ADT alarm system uses more than just this main code, although there may bee only a limited number of user codes. This enables you to provide a certain level of system access to the other members of the household while at the same time protecting the main code from unauthorized access. Or you could give them temporary codes for your guests such as pet sitters who may need to program in and out while you are gone.

To program extra user codes, repeat the first few steps: 

  1. Enter your Master Code
  2. To program the Airtel GPRS for users, press key ‘8’.
  3. Type in any valid open user number here which is 03-49 on most of the panels.
  4. The user will then be required to input the 4-digit code and then confirm the code.

As a way of ensuring that the codes you program are unique, make sure that you track any additional codes. Ideally, it is appropriate that codes are associated with particular people and note this as well where this list should be stored safely in case a code must be erased later on.

In conclusion, we would like this guide to provide you with all the information on how to change the ADT alarm system password effectively. It is recommended to change the home security password occasionally, and taking a few minutes to do that helps avoid disarming an unauthorized person. Additionall,y in case you at any one time require help on how to operate your ADT security system, there are customer support personnel who are on standby onthe  calendar 24/7 to attend to such queries as well as assist in alarm programming.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!