It is crucial that the time is set correctly on ADT alarm system to guarantee that the times set for the arm and disarm of the alarm is as scheduled. Even if your alarm system is set to go off a few minutes ahead of your planned security schedule, this can disrupt the routine significantly. On the bright side, it is not very complicated to reset the time on an ADT alarm Most of the time.

Overall, you probably only require access to the specific alarm panel in order to change the time on an ADT alarm system in most instances. This is the main interface where you arm and disarm the system and the one that you interact with most. Your alarm panel will be in the form of a keypad with a screen on your wall if you have what is referred to as a hybrid system where you have wired control panels alongside other components or it can be a virtual keypad on an ADT mobile app or web page if you have gone for a fully digital system.

Step 3 – Check Your Alarm Panel Model

The first process that one has to follow to change the time on his or her ADT alarm is to identify which kind of alarm panel is used and get it. There are numerous ADC Safewatch Pro 3000EN, 790 Touchscreen, and the Command Smart Security Panel that are frequently used for ADT alarms. Depending on which of the two panel models is implemented in the analysis, the process of accessing the time settings may be slightly different. If you have any doubt on your model just look at the ADT alarm manual you have.

Open Your System’s Alarm Panels Menu

They may include a wall-mounted alarm panel as well as an ADT panel that can be accessed through the internet or a mobile interface; in each case, you start by navigating to the panels home screen. In physical panel, this normally entails in typing your master code on the number pad beside the panels then pressing the MENU button. For virtual panels, which can be found on the website or the app, there is a button called MENU marked as clickable on the panel with your mouse or with your fingers.

Navigate to Time/Date Settings

When you are in the main menu, you have to find the TIME/DATE section among others available. Normally, on most of the alarm panel of the ADT, you just need to employ the arrow buttons that are on the panel or in the application to point to this choice and then to hit it. This will lead you to the page where you can change the currently set time and date.

On some of the more advanced touchscreen ADT panels such as the 790, you may have to first go to the SETTINGS menu and then SYSTEM SETTINGS before accessing the Date and Time Administrator by selecting it from the list. Once you have gone to the master menu, the time and date screen is fairly easy to find regardless of the specific steps that you have to take, but they may differ slightly depending on the model.

Adjust the Time Settings

Once you are at the TIME/DATE screen, the remaining steps of programming your ADT alarm to a new time are beyond simple. Here, it will show the current set time and date. To change the time, all that is required is to dial the correct current time through the numbered keypad or virtual number pad in the format HHMM with AM/PM selected if the system you are using is in 12 hours display format.

After the new current time has been inputted, either OK, Save, or another button to confirm the input. This will also help to re-sync the time on your ADT alarm system by simply pressing a button. In case it is inaccurate, you might also need to change the date on this screen as well in a similar way. Make sure that the time zone of the system is also adjusted if needed, depending on the geographical location of the home or facility being monitored.

Confirm New Set Time

Once this is done by selecting the option of time, adjusting the time in the alarm systems menu, and then selecting save, you are done. But, it is always safer to ensure that the new time change has been effected correctly on the system by exiting the particular menu to the home screen of your system. Make sure there is a current updated time there to confirm the clock there has been set again in order to arm the system and prevent false alarms on a particular time schedule.

Troubleshooting Time Change Issues

It is also important to note that if for some reason the change that you made on the ADT alarm did not seem to save correctly, then follow all the procedures all over again and then try typing in the new time correctly. Make sure that you are not on a simple clock viewing screen but the main time setting menu which is used to set the time and date for the HDTV. If there are persistent problems, you may have to erase all the settings on the panel and program new ones.

For more complex problems which are beyond display times problems, you can always reach out to ADT service support department. An ADT call center representative may verify all the programming in your alarm systems or send a technician if there is a suspected equipment issue.

Maintaining an Accurate Time

If you want to know how to change the time of the ADT alarm panel or through the application, it is necessary for you to know that in the future it may be necessary to update it again since the data may gradually shift over time. There are always specific causes for your alarm systems internal clock to get out of synch someday; such causes include power failure, diminishing battery power, change of daylight saving time among others. With time, make it a point to verify that the date and time on your security system is accurate with your phone every now and then or in fortnets. It is recommended to set it correctly and then consistently reset it as needed to ensure orderly functioning of other programmed automatic arm and disarm events.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!