Introduction For this reason, one of the most frequently asked questions by the owners of the ADT alarm system is how to activate and disable the door chime. The chime is the beep sound the system generates when one of the protected doors or windows is opened when the system is turned off. This chime is useful to inform you of the presence of an unfamiliar person in the house but if it rings every time you or your family member is coming or leaving the house it becomes extremely irritating. We are however relieved to know that it is easy to switch the ADT alarm door chime on and off.
What You Need For you to turn the ADT alarm door chime on or off, you only require control over the alarm system keypad. This is the same keypad that you use for arming and disarming the system, and it should be in the same location where the keypad for the first floor is located now. It will have 10 buttons marked 0 to 9 and another set of buttons or icons for Stay, Away, Chime, and Reset. It means that as long as you are in a physical position to go to the alarm keypad and make changes to the chime setting, then everything is possible.
Understanding Chime Modes The ADT alarm systems have a few options when it comes to the chime that will go off in case of a break-in. These include
- No chime The command sounder will not emit any sound when a protected door or window is opened with the system in the disarmed state. This just turns off the chime entirely without any limit.
- One short beep The system will give one short beep of the disarming of the zone while the particular zone is in a faulty state. This is the gentle knock, a sign that an entry point has been created.
- Constant tone The tone in the system will be played time and again until the zone is closed. Thus, if you open one of the doors that have been fitted with the chime, the sound will play persistently until you shut the door. This is the simplest chime setting and must be the most obvious to anyone using the phone.
When consulting the manual that came with your system, you should be informed of the chime modes supported in the ADT alarm of your model. The older models for instance may only have the facility that involves enabling or disabling the chime and there are no modes involved here.
How to disable the ADT alarm chime completely If you have no desire to remove the ADT alarm door chime but to entirely remove the sound, it will not take you long to do so. Just follow these steps
1. Make sure that your system does not get triggered when setting the alarm as any movement on the keypad may be interpreted as an arming or disarming command. It should display that the status is Ready to Arm with no time counts back to any other state.
2. The first step is to press the Chime button located on the keypad just once. This may be accompanied by a musical note icon or the words Chime or Tone may be written at the center of it.
3. Wait for a tone or an on-screen message that tells you the chime is off, called Chime Off. This shows that the chime setting has been disabled/toggled off successfully;
Now when you open protected entry points while the system is disarmed, it should not make any form of beep sound besides the door chime tone if set.
The song used in turning on the ADT alarm chime. In case you opted out of the audible notification at some point in the future, you will also easily turn the ADT alarm door chime back on
4. Make sure that the system displays the Ready to Arm message just to be sure that it is unarmed.
5. What you have to do is to press the Chime button only once.
6. Make sure that there is a confirmation tone and/or message that states that Chime On has been set to On.
It’s as simple as that for a true representation of what the company is all about and the type of products it offers. Your chime is now enabled again to the last mode setting that you were using for it. Speaking of modes. ..
Providing details on how to change the ADT alarm chime modes As mentioned earlier, there might be additional modes for the chime to be supported by the ADT alarm systems apart from On and Off. Depending on the situation, the following modes are used to transition from one mode to another:
7. Beginning with the disarmed/Ready position.
8. To select an option you shall press the Chime button until the indicator points at the desired option. For example
- You’ll press once for the brief chime.
- Press again for each successive chime.
- Press again to turn off the chime
After each press, a message indicating the new mode will be shown on the screen and/or heard through the speaker in the form of a voice prompt.
Here’s Why You Might Disable Chimes It may be useful at times to know how to disable the chimes of your ADT alarm system. Some of the likely causes of disengaging the chime function by the homeowners are
- The chime is nice but proved to be annoying when one is coming/going in and out often.
- Silencing Chimes when transporting Mat/Tools and equipment in and out of the operating room.
- Disabling any chime during meetings or when the house is full.
- Avoiding chime noise when either the alarm or the equipment is being serviced or repaired
Well, no matter the reason you have for wanting to turn off the chimes, make sure that you understand the simple chime button process above.
Chime Settings in User Menu The last option is the Chime Settings which is also located in the User Menu and has sub-options such as Chime Default, Change Chime, and Advanced. Most ADT alarm systems also provide you with the option to operate chime settings through the User Menu rather than having to use the Chime button. You can also access your User Menu if you enter your Master User Code on the keypad.
Troubleshooting Chime Problems The instructions mentioned above should be followed if you are experiencing problems turning on/off chimes on the ADT alarm keypad; just ensure all doors/windows are well closed. This chime will keep on sounding provided the alarm believes that a certain zone is still open.
Last but not least, if possible, attempt to go to the Dealer Menu which is accessible by the installer and is likely to offer more information about the status of the chime feature. This may be done with the help of ADT technicians if the technician on site cannot figure out the problem.
Conclusion The Option to have an audible door chime on the ADT security system may prove useful and helpful in terms of added security. However, certain users might wish to turn off the chimes partially or completely, due to the following reasons. Regardless of whether you want to mute chime sounds to the maximum or transition from one chime mode to another, this alarm chime button makes it considerably easy and quick to enable chime, disable chime, or set chime preferences. You only need to press the chime button and wait for a beep that confirms that the system is in the desired state when disarmed.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
