Introduction As previously mentioned, most home security systems, including those from ADT, have chime as one of their beneficial attributes. Upon triggering, the chime will emit a dinging tone when the particular doors or windows are opened while the disarmed alarm is off. It means that even when you have not set the full alarm you will be in a position to be alerted. To use the alarm and set it for areas that make the chime sound, it is very easy especially if you are using the ADT alarm system since you only need to follow simple steps.
What You Need This is one of the important things you should know, to enable the chime feature, your ADT alarm system must be set.
- A functioning home security system that is supported by an ADT and may or may not have chime options present. Some ADT systems and control panels have chime options, but it is possible that a basic security alarm system does not. This may vary depending on the model of your car; you can consult with your owner’s manual or with ADT.
- The ability to get to the control panel, which is usually incorporated into the keypad with the numbers 0 through 9, or the touch screen option that can be added along with the system. It is from here that you set parameters such as chime rules by use of the keypad or the touchscreen.
- Trafficking in your master access code. For settings such as, enable or disable the chime, require the ‘master code’ which is set once the system is installed. This confirms that you are indeed an administrator, and hence possess the right to alter system settings.
Chime is one of the features that was recently added to the Amazon application, through this feature, Amazon hopes that customers will be able to find items easier by using voice commands to search for them. With those prerequisites met, turning on the ADT alarm chime only takes a few quick steps:
1. On the control panel, input the master access code to allow the user to gain access to the configuration menus.
2. The location and name of the chime or notification can vary across devices; however, it should be under Settings or Events or a similar section. It is important to note that information on the menus and terms may be slightly different depending on the model of the Control Panel.
3. Here you’ll find a Chime option that should be set to Off by default, but switch it to On. You can also witness an option between Enable and Disable.
4. Move the cursor down to Done or similar text which indicates that it will set the new chime.
With chime now enabled worldwide, the panel will give off a brief chime or beep whenever particular zones such as front doors and motion detectors are triggered even when the system is turned off. Yet, which ones of those should make the chime play? Read on!
Customizing Zones and Outputs Chime toggle can be turned on or off to apply the feature across all parts of the world. However, ADT systems also enable the selection of which of the particular zones will be set to make a sound if they are opened. This allows you to selectively exclude only certain perimeters but not all so that you can confine notifications to various entry/exit points only.
5. To find the zone configuration one has to go to Settings, Events, or more options depending on the device.
6. Swipe through the list of zones: Front Door, Back Door, Living Motion, and so on.
7. Uncheck or check the chime icon or toggle for all the zones you wish not to ring the chime sound or all the zones you want to trigger the chime sound.
You can also define which of the panel speakers produces the audible chime notification by choosing from the Output Chime option. It is useful if chime sounds are required from an indoor siren or an external bell with better coverage as compared to the horn.
Consistency is Key After setting up chime announcements and further setting the way to trigger them, your ADT system will beep each time you open specific doors and windows. Just make sure to turn the feature on or off constantly as required to minimize confusion on the part of the drivers.
The notification sounds for the chime options become irritating background noise if they are left on when you do not require them. On the same note don’t deactivate the feature for a certain time then when there is a break-in alert you realize that you have not enabled it! Of all the settings known to man, consistent maximum home awareness is only achievable when there is compliance with the settings.
Troubleshooting the Chime ADT chimes provides an added measure of insight into the happenings in a home in between the high-pitched intrusion alarms. But issues can arise with the chime feature, including But issues can arise with the chime feature, including:
There are no alarms or sound signals that play when the zones open. If the chime-enabled zones including the front door for instance do not cause the control panel to beep, then the chime notifications may have been turned off in some way. Go to your system settings once again and turn on the global chime toggle as well as all your zones. Another way that chimes are not heard depends on the situation when there is a physical problem between the sensors and the alarm panel due to the wiring.
Chimes Not Stopping Does the chime keep dinging constantly and uncontrollably despite all entryways being shut tight? Such contacts might produce false signals to the system, which is not what the cleaning system wants. Likewise, a door/window chime could also be caused by the loose door/window parts including moving in windy conditions. Clean sensors, check to make sure that all contacts close without any bumping, and adjust the detectors so that you do not have nuisance chimes.
Conclusion Being able to receive chime notifications as a way of having awareness of home activity even when an ADT system isn’t actively armed can go a long way toward giving people peace of mind. That way, you fully understand how to enable and set the ADT chime rules and regulations and how best to utilize this additional feature to your benefit. It is important that you only accept the type of notifications you are interested in and only chime in when you don’t feel like you are being overwhelmed with notifications from your acquaintances. If there is anything else you would like to know regarding the other advanced functions aside from being able to turn the chimes on, you can always contact the ADT representatives.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
