ADT alarm system might need to be reset for many reasons, and below are some of the reasons that cause this need. Perhaps, you have skipped your alarm passcode and you are in a fix on how to unlock it. Maybe there is a technical problem and your alarm panel is not working well, and it requires restarting. Or maybe, you wish to cancel all the codes and programs and input new passcodes, sensors, etc. Disarming an ADT alarm is not very complex but the process may slightly differ depending on the system type and the control panel used.
The first thing that the user needs to do is to locate the model of their ADT alarm system or the control panel. Some older ADT systems may include a simple keypad that has buttons and lights on its surface. Modern ADT systems include touchscreen control panels that are more interactive than those in the past. Understanding your particular system type will help you decipher the procedure of factory resetting the alarm. The types of ADT alarm control panels comprise Safewatch Pro 3000, Safewatch Pro Custom, Pulse, iControl, Smart Security, Command Smart Security, and Command HD security systems. All need resetting of a key on the device or entering a reset command, although some models have a more complicated procedure of factory reset.
In this regard, the primary thing you need to do before engaging in the factory resetting of your ADT alarm system is to contact ADT customer support. A full reset reconfigures the system as new settings are obtained and eliminates all changes made by the ADT technicians. If the ADT system was installed by the prior homeowner, don’t be misled – it’s still connected to the ADT monitoring center. It can be registered and monitored through the use of a code that should not be reset by an individual on his or her own as this may lead to complications in the registration process. Before contacting ADT, call customer service first to inform them and have them make a note of it or tell you the proper procedure to follow. In case you need to locate your ADT account and system details, it is crucial to look at the sticker or engraving on the control panel or keypad before making a call.
To reset an ADT Safewatch Pro 3000 system, the first thing that you may want to do is to enter your master code if you are aware of it. If you do not have the current code, you will have no option but to carry out a hardware factory reset through the reset button located on the panel. Just insert a little tool and fit it in the reset opening, then press the button and hold it for five seconds. This will revert to the default master code that was set by the installer and one that you can set from time to time.
Another way to control the Safewatch Pro Custom system is to use a keypad and enter the reset command. Dial * * 9 9 9 # if you know your identification number, enter it first then. It will emit three beep sounds, and the system status LED light shall be turned red and blink. Then press 0 # to restore the default setting. The LED light will blink after the entire process to signify that it is done.
ADT Pulse is a structured, engaging system that allows the user to interact with the various aspects. To restore Pulse to its factory settings, the user must touch the settings button at the lower left part of the touchscreen. Then tap on Notifications and Support scroll down and tap on Return to Factory Reset at the end. This will bring up the start menu and reset the central hub, the connectivity bridge, and other components of the hardware.
If you want to reset an iControl panel, then you are required to disconnect the backup battery to turn off the unit. Then, while it is booting, you have to hold the physical reset button located on the panel for ten seconds. This will bring the phone back to factory shipped or fresh settings if it has been tampered with before.
Smart Security systems feature a reset option which is activated by * * 0 * * #. Talking about the Command Smart Security panels, the code to enter on the keypad is * * 99 88 77 #. Command HD security systems can be restored by going to the installer mode – * 5 * 1 2 3 4 #. Next press 800 # and follow the prompts: You can choose from 1 for a reboot, 2 for factory restore, or 3 for reset.
At times, the dependent program by resetting the alarm panel may not reset all the sensors. If you have any hardware devices such as door and window contacts, motion sensors, etc., they must be reset manually too. Refer to ADT’s specific guidelines for sensor types in your system on how to re-sync them to the panel from the basic steps.
Once you have reset the ADT alarm system, there are a few important settings that you are likely to want to reset and these are; Master Pin and the panel to the ADT monitoring center. Consult the manual for information concerning your particular equipment. Lastly, contact ADT customer support through the online account dashboard or the mobile application to verify settings. Make sure that the license number, account number, or any other detail you have entered is correct. You should test it to its maximum capacity to ensure that the sensors, the sirens, phone to ADT are working again after the reset.
Indeed, there is nothing complicated about how to reset the alarm system provided by ADT. However, to do an improper master reset is a disruption. It is important to inform ADT before you perform the reset and also it is good to know the proper procedure for your particular alarm type. With a few clicks on the control panel or just pushing a few buttons on the reset switch, your ADT security system is as good as new.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
