According to the guides provided below, if you need to reset your ADT alarm system, the steps are quite easy. It is also expedient to know how to reset an ADT alarm because the need may arise in different situations. Maybe you need to reset the alarms that you have triggered by mistake, change the user codes especially when a member of your family or staff has left your house or office, or when you want to continue with the operation of your security system after a power surge. Unfortunately, there are times that you need to reset your alarm especially if the keypad does not function well or if it is behaving abnormally. No matter your reason for wanting to reset the ADT alarm system, you can do it by following the given below steps.

You reset your ADT alarm system of things want to do first: 

Alarm System Tests – Go look at the alarm keypad to see if there are any trouble conditions signaled. This could be due to a low battery, absence of AC power, a communication problem, an open zone, etc. To prevent further issues, try to address the trouble alerts before rebooting your system.

Contact the Monitoring Company – If you have a professional monitoring company, it is crucial to inform the monitoring company that you will be resetting your alarm soon. This helps avoid reporting false alarms while managing the system and resetting it.

I was searching for information on how to reset an ADT alarm system on Google. Usually, to reset an ADT alarm, there is a necessity to input two key numbers only on the keypad. 

Enter Your Master Code

  1. The first procedure is simple, where you need to input your 4-digit master code on the alarm keypad. With this code, you can get to the system functions of the phone and it is usually set to 1234. If the master code was changed using your PIN or by an ADT professional, type your master code at this stage.
  2. Press the Reset Button After the master code is correctly entered, you should then press the ‘Reset’ button on the alarm’s keypad. This could be labeled as Reset, Restart, Clear, or any term that a particular culture defines in its working environment. In many of the keypads designed for use with ADT, the Reset button is usually red.
  3. Wait for Reboot Sequence When you press the Reset command, your ADT alarm system will start a reboot process and run through various cycles. There will be several blinking lights on the keypad and you can also hear beeping coming from the system as it reboots. This will only take about 1-2 minutes and I assure you that the results will be comprehensive. Turn off the device and do not press any other keys during the reboot process.
  4. Re-enter Master Code After that, if you wish to navigate to a specific function in the ADT alarm system, it might be necessary to type in your master code once more at the beep. This allows commands again after a reset is finished.

Other Ways to Disable an ADT alarm Possible ways which can be used to disable an ADT alarm include; For most ADT alarm systems, the above steps should suffice in resetting your alarm system and getting it back to its normal state. 

Resetting The Panel – Some of the keypads have a reset button which is usually small and is used by using a pin or even paper clips to reset your panel. It is typically a tiny round hole with the label ‘Reset Button’ somewhere near it – on the product’s side or even on the back.

Remote Reboot – The high-end ADT alarm systems that are Control can be rebooted remotely, through the ADT Mobile application. It also allows you to restart your panel if you are not at home.

Power Cycle – Disconnect the main power to your alarm system and then reconnect it, which is a way of, rebooting the panel if you like. Remember that if power is connected to the backup battery, it may also require to be disconnected.

Other User Codes – All other specific codes you put in for your family, friends, or staff will also be deleted in the process. Since you will be changing the owners of the system, these 4-digit PIN codes used for arming and disarming the system will have to be reprogrammed.

Zones – If you made modifications to the description of the zone, the sensitivity, or the status of the zone, then these too will go back to the default settings that were developed by ADT. Update them again after a period according to your preferences.

It is therefore advisable to wait for a confirmation that the ADT alarm reset is complete and then retype any custom codes and settings for your zone that you wish to retain.

Some of the complications that people encounter when trying to reset an ADT alarm are as follows: As you follow the steps in this guide on how to reset an ADT alarm system, the process is smooth and free from any issues. But occasionally, you may encounter a few hiccups when trying to restart your alarm panel: 

Keypad Unresponsive – If your alarm keypad completely stops working or even fails to respond to any command after performing a reset, then the best thing you can do is to try and power off your system.

No Function – At times, you power your ADT master code to regain functionality but this does not allow you to operate the system to execute other functions after some time. It is advised to wait for approximately 10-15 minutes before typing in your master code once the reset is complete.

Possible Alarm during Reset – This can be a bit embarrassing at times, especially when the alarm produces an audible sound during the reset sequence, thus waking up the monitoring center to alarms that could have been canceled later. Phone the monitoring center after resetting to prevent it from activating false alarms.

Multiple resets may be required - If your ADT alarm system continues to have issues with some of the issues above, it may take multiple resets to bring the system back to normal.

If the circumstances force you to seek professional help continually while attempting to reset your ADT alarm after having gone through all the mentioned tips then perhaps it is time to engage the services of an ADT technician. Call ADT customer service to address the remaining issues; avail the appointment services for a technician to be dispatched.

Resetting ADT Pulse Systems If you are using the Pulse system for home automation and video monitoring, then the process of resetting the ADT alarm is similar to how it is done for regular alarms. To reset your master code, you will need to enter your master code and then press the Reset keypad command. Then reset the settings of the device to the normal mode if they have been changed to suit the users’ preferences. The only change is that if cameras are installed then you may be required to reset the user permission settings within the Pulse portal or the mobile application too after the equipment reset is complete. All the new guest accounts and shared privileges throughout the OS will not be preserved whenever a system restart is performed.

In Summary, The worst thing that might happen when you need to start your home or business ADT alarm from scratch is not necessarily a bad thing. Indeed, it is also useful to reset the ADT systems from time to time as it could reduce the wear and tear problems that arise when the systems are frequently used. But do remember that all custom user codes and zone settings you have set will be deleted once you attempt to reset the ADT alarm system keypad. In the event you intend to retain any special codes or detection preferences that exist in the course of the reboot sequence, have the sequence to reprogram them in advance. Use the guidelines provided.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!