ADT Security is one of the leading home security systems in the United States and Canada that is available today. The company’s professional equipment and effective surveillance make ADT protect millions of houses and families.

Effective use of the ADT system also involves knowing how to activate the alarm when you leave your home safely to avoid cases of false alarms. Knowing that your system is armed instructs ADT to begin to monitor for the presence of burglars, fire, floods, carbon monoxide hazards, and other risks. It turns on the alarm horns, alerts ADT that it should monitor alarm events, and ensures that you and your home stay safeguarded all the time.

This guide will provide you with guidelines on how to disarm your ADT alarm system if you have one or want to get one. We will go through the whole procedure and also provide information and recommendations regarding how to load your gun into the system safely and efficiently. These directions can be useful for most of the ADT alarm models.

Make sure you have your Security Code or PIN ready.

First, requires your own special 4-digit ADT security number or password. With alarms, users are usually given unique security codes every time they establish an account and provide their equipment with ADT. If you do not remember the code or if you never entered one.

Ensure that you write the required security code in a manner that other people cannot easily notice what you are doing. This maintains confidentiality. However, note that all the people and pets should either leave the premises or stay indoors should be inside the house before the system is set.

Now that we know how to use a keypad and buttons, the next step is to find that K.

ADT systems provide a keypad and interface panel that enables users to manage their alarms. Many are touch screens while others have physical buttons on the side or bottom. Find one, preferably installed on an interior wall of your home or garage, and then stand in front of it.

Common interface panel buttons include: 

  • Away Arming button which when pressed activates the exterior and interior alarm sensors when you are leaving.
  • Stay Arming button to arm just the perimeter sensors only when you are at home.
  • Silence button to stop the alarm signal
  • Number keys from 09 are used to input your authorized code.
  • Guides to police, fire, or medical help call buttons
  • Lamp indicators are also found such as Ready lamp, Armed lamp, Trouble lamp, etc.

Away mode turns on the total ADT protection package including the interior protection devices. Take it with you whenever you step out of the house to guarantee comprehensive monitoring coverage. To arm in Away mode: To arm in Away mode:

Step 1: Ensure all windows, doors, and the garage door as well as other doors and shutters are properly closed. Seal any loopholes you might observe that trigger your alarm after being triggered.

Step 2: Ensure that all the people, pets, fans, decorations, and anything else that could set off the motion detectors have been relocated inside the home or are in areas where the detectors are not placed. There should be no movement in and out of the protected area in the process of arming.

Third step: Using your ADT keypad, push the Away button or, if you have a keychain remote, push the Away button found on the device.

Step 4: Press the * button until the Enter Your Code prompt appears along with the Ready blinking circle.

Step 5: Enter your 4-digit security code using the 0-9 numerical buttons on the keypad located at the base of the front panel. Ensure that no third party can gain access to see the code being inputted.

Step 6: The small circular light will start flashing and the word Armed written on it. This will mean that an exit delay countdown will be displayed to you to ensure that you are safe as you exit out the designated door. The alarm will set off after the countdown time expires.

Thats it! Your ADT alarm system should now have full intrusion and hazard protection activated now that you’re away.

You must continue arming your ADT alarm.

Stay mode is useful when you are at home but do not want to leave the doors and windows open but at the same time, do not want to stay outside they keep the exterior part secure. Perimeter detection is on, and interior motion sensors are turned off during the cleaning process so that you do not set off your alarm. To arm in Stay mode: To arm in Stay mode:

Step 1: ensure all points of entry such as the windows, doors, garage doors, and probably others are well closed and locked in a way that cannot be opened accidentally to trigger the alarm.

Step 2: Ensure that everyone in your home, including your family members, and pets is indoors away from the path leading to the designated Stay Arming entry exit door. You would like to have the point of view located as far inside the home as possible.

Step 3: Input the Stay code by holding the Stay button on the keypad of your ADT until the Enter Code appears followed by the Ready status light.

Step 4: Press the number buttons of the 4-digit password of your choice. Ensure that you do not let other persons see your security code.

Step 5: Armed will show confirmation that the activation has been activated. Your perimeter sensors are active while your interior motion detection has been deactivated for the time being. You do not need to cancel the Stay mode status when moving around inside without restrictions.

Enjoy secure protection! ADT alarm will ring especially if any protected point for instance a door or a window is opened. Pets also can roam around with ease as perimeter security alone is running in Stay mode.

Here are some additional useful tips to follow when arming your ADT security system: 

  • If any of your protection zones is faulted or opened while attempting to arm, your keypad will read Not Ready or Exit Error to stop activation. Open for a moment and fix the problem and then try to arm again inspect the house again. Some of the causes can be an open window/ door or recent movement sensed from inside by humans/ pets.

  • The only way to thoroughly challenge your system is to set it in the Away mode and then attempt to open an exterior door or window that has a sensor. The loud siren will sound next there will be a call from the ADT monitoring center to ensure that everybody is safe. Make sure is not an exercise so that it does not send the rescue team. This confirms that all the alarms fully work as intended.

  • Ensure you set a timer to help you disarm your alarm when you get home from work or at any other time you wish to disarm it. Auto scheduling can also be set up through the website or an ADT mobile app where the system can automatically arm and disarm itself.

  • Think about home automation systems linking your ADT alarm to the management of the entire home. Other devices such as Locks, Lights, Thermostats, garage doors, and other devices can be authorized and can either be set to turn on alarms or other special responses upon detecting unusual activity for security purposes.

  • Make sure you check the times you take to enter or exit the car so that you do not take a long time to lock the car or disarm it when you get home. The majority of ADT systems leave it with default settings with close to 30 30-second delay but if this is not suitable, you could request a change from ADT.

Conclusion

It is crucial to understand how to arm and disarm your ADT alarm system specific to maintaining the constant security of your house and your members when you’re gone or at night. As an additional note, it is crucial to adhere to the recommendations provided in the above-mentioned step-by-step guide to activate the alarm’s security functions quickly. Don’t hesitate to ask any questions.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!