This company is among the oldest and most recognized Home Security System providers that offer a great number of security systems for millions of houses and offices. One of the greatest selling points of many ADT alarms is the chime option. The chime is an optional alarm that sounds every time doors or windows are opened when the system is disarmed and is in its standby state. This informs you when the alarm has been triggered even though the particular alarm will not ring.
ADT also provides various options through which you can choose the kind of chime that you want according to the particular type of security panel you have at your home. You can set the volume, mute the chime, limit its listening area, or enable or disable it. I will explain how the ADT chime can be set up and managed in a few easy steps to ensure it fits your requirements. In this article, I am going to provide you with guidance on how to alter the chime configuration on typical ADT security systems.
Find Your Alarm System
The first procedure to follow is locating your ADT alarm system panel as this will be where you can monitor or alter settings like the door chime.
- It has to be installed on a wall within the home, preferably near a door that leads to the outside of the house.
- Delivered in a small, wall-mounted box,
- These buttons in incorporated into the keypad outside the home
This panel should also consist of a digital display screen and buttons, lights, and symbols of different shapes and sizes. It should contain some lettering that indicates that it is an ADT product. Try to note down the model number of the ADT panel if possible since there may be installation and user manuals that may be useful.
If you do not know your current chime setting on the panel, follow these instructions:
Establishing a basic understanding of ADT chime settings to avoid confusion before attempting to change them. The standard setting on most ADT systems is for the chime to occur for all of the zones or sensors when the disarm mode is activated. This causes an alert to sound each time a door or window that is protected is opened.
Ensure your chime is currently active on the system, or if it was disabled on some zones which you can view on your panel display. Another light that might be lit up or off is that of the chime indicator which also goes on when the chime is activated. Consult your model guide when it comes to reading the panel so that you do not make a mistake with the readings. Ideally, the chime should sound like a small beep every time an area is violated in the disarmed mode.
Mute or Unmute the Chime Comprehensively
The simplest setting is when the user chooses to enable or disable the chime across the entire system.
- If the system is on, the message displayed on the screen should read, ‘Enter your master code to turn off the system if needed. ’
- Look at the panel to find the “Chime” button and click on it just once
- Wait for the beep tone and check the chime light also as a guide to turn off.
Doing it again will enable the chime again with your system's default settings. This may open the chime for all the zones as well, and one should be aware of this.
We also suggest checking other chime features such as disabling the chime while opening the protected doors and windows to confirm if it is disabled or enabled in the entire system once some modifications have been made. Specific details concerning this matter are provided in the user manual of your specific model.
Limit the operation of the Chime to certain areas Only
This way, in case you do not want to completely disable the ADT chime, you may want to do so only for specific zones or the protected points of entry. This means that you will be able to receive a notification for a primary door and at the same time, turn it off for a window, garage entry, and so on.
To program the chime for specific zones:
- In case it is locked, switch on the panel and enter the master code to disarm the panel.
- To access and choose the zones on the screen, press either “Zone” or “Bypass. ”
- On the chime icon, you can click on the switch to turn it off for unwanted zones.
- Save changes after you click on the preferred chime zones
Regarding the chime zones, note that if your system supports “Home” and “Away” modes, you may need to program these for each of them. Perform this for both ambiances. Consult your security panel for assistance on how to demystify the zone numbers and what they mean.
Change the volume of the chime or the frequency or pitch of the chime sound.
However, if you would like the chime enabled for system-wide notification, then there are options for the sound along with the volume and tonality.
Low Volume Chime – Decibel level that is somewhat lower than regular beep but still loud enough to be heard in the vicinity.
Continuous Tone – The second type of beep is louder and can be heard more clearly throughout the home.
Doorbell Chime – Two chimes with a pleasant sound with being beep.
To change your ADT chime’s loudness or sound:
- Press ‘*’ followed by a security code to get the other options in the Master Settings Menu.
- You will have to go to the “Chime” or “Sound” option.
- Swipe to select a new tone and volume for the intonation.
- This will help you not to be confused when another time comes around and you want to modify the chime settings.
Put the new chime volume and sound to the test when the system is disarmed by triggering any protected door or window by the burglar alarm sensors.
Conclusion
It is easier to have the ability to set different chime alerts for doors, windows, or any other zone of your security system. This enables the users of ADT alarms to minimize the number of false alerts while still getting the alerts when required. If you wish to turn it off completely, alter the chime’s melody or its loudness, or allow it only in specific areas, your ADT panel offers this feature.
Unfortunately, ADT users cannot change the basic settings of the chimes directly, but by following the correct steps for your panel’s model and settings mentioned above, anyone can set up chimes as they want. Change these settings as often as you need to according to the changes you have yourself. Intelligent chime settings extend the value of home security systems as well as make for improved feelings of security. For any other queries regarding chimes and other modes in your ADT security system, feel free to contact the customer support of ADT.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
