Alarms for Security System – How to Change the Battery of an ADT Alarm System
A functional alarm system is an essential aspect of the living space due to the protection of the dwelling and its occupants. ADT alarm systems have battery backup for electricity shortage situations to ensure the system is still functional. Through time, these batteries may deteriorate that it can no longer charge and must be replaced for the proper functioning of the system. Self-implimentation The process of changing the battery in an ADT alarm is easy that does not require a professional to do it.
Before changing the battery, there are some key things you need to consider:Before changing the battery, there are some key things you need to consider:
-
Determine whether you have the older AE, AG, or the newer AEG type of ADT control panel and purchase the correct replacment battery for this type. There is usually a 12 volt rechargeable sealed lead acid battery for most panels out there in the market. It doesn’t hurt to look at your manual and confirm. You should try to get one of similar size to the first, voltage and amperage in order for it to work correctly.
-
Find where you have your control panel box. For hardwired systems, this is usually located in a hallway closet or in a room or garage in the basement. The battery is stored in the box, so ensure the box is reachable throughout the process so that you can open it and get to the battery.
-
Keep a note of where you removed the terminal of the old battery from the control panel. ADT systems maintain time and settings based on the charges provided by the battery after a specific interval of time. This means that one need to reinstate the time, date and any other options which were set on the battery after its replacement.
-
The last way which can be taken is to buy a new battery for the appliance. The batteries can be purchased from any hardware store or bought online if they cannot be gotten locally. Do not use cheap off-branded batteries which might not last as long as needed or may not be of high quality. The specific recommendation is for its replacement with another ADT branded one but better quality batteries sold by other companies that costs a little more but are of better quality will also be acceptable.
Once you have all the necessary supplies, changing the battery involves just a few simple steps:Once you have all the necessary supplies, changing the battery involves just a few simple steps:
-
Turn off the security system if it is switched on at the time of trying the code. You would like for the current battery to be disconnected without an alarm going off so that the system is disarmed.
-
Press the combination of buttons to open the control panel box. In most cases you will notice the backup battery enclosed in a battery casing or metallic container with some cables connecting it to the panel.
-
This requires that the wire leads of the existing battery be disconnected from the alarm panel power terminals. One of the outputs may have push-in connectors while the other may be employing screw terminals to release.
-
Before installing the new battery make sure you have removed the old battery from it compartment or housing unit. Pay attention to the wiring configuration of this model, the position of strapping, and the pieces of plastic housing. You will need to reassemble these in the same manner as well,
-
Screw in the new battery to the battery slot/ holder making sure that the polarity is correct. Make sure that the positive terminal of the battery is properly connected to the corresponding colored wires from the alarm panel while the negative terminal must be connected to the other set of wires in the correct sequence.
-
Replace the battery leads for the alarm panel’s power terminals that you have disconnected. Ensure that the positive wire is attached to the appropriate input while the negative wire is attached to the negative input.
-
Use the screws to close up the control panel box but be sure not to pinch any of the wires on the process. The articulated system cover should fit back in and lock in place properly.
-
Press the reset button for the ADT alarm panel system. This is used to awaken the battery with the panel in order to bring it back to its normal functioning level.
-
Rewrite the date, time and any other settings that might have been changed when the cell phone was reset. If required, consult the panel manual for detailed instructions regarding the process.
-
Perform system tests aimed at checking the battery voltage output and there are no faults. Disengage and engage the system again and at the same time, activate the sensors to see if everything is functioning properly.
By following these key steps, your ADT alarm will be ready with a brand new battery in no time! Be careful when taking out or installing the backup battery because you don’t want to have electrical shorts, reversed polarity or loose connections that may harm the panel or make the method fail to function as it is supposed to.
Never discard your old lead acid battery as it should always be recycled from a recycling center. When you have a high quality replacement battery installed with correct polarity inside the housing of the control panel, your ADT security system is capable of having battery backup during power failure that is vital to safeguard your home and family. Use the battery as often as possible and replace it with a new one after every 3-5 years for safety and security reasons.
-
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
