If a smart thermostat from Vivint has a display screen that has gone black or the low battery warning is flashing, it’s time to change the AA batteries. Replacing the batteries is easy and would take you less than 5 minutes, depending on your experience and dexterity. The following are the steps that you can follow to effectively prepare your research paper outline.

Materials Needed

  • New AA alkaline batteries (usually 2-4 depending on the thermostat type for initial setup)
  • Phillips head screwdriver of about six inches in size.

Before You Begin It is recommended that you take a snapshot of your thermostat wires and the labels you see on your screen with your phone before you go ahead and replace the batteries on your thermostat. This will help you in rewiring the thermostat wires correctly when you are done.

If the thermostat is currently managing the heating and cooling of your house, switch off the home HVAC at the switchboard so as not to receive a shock when changing batteries.

Step 1: Reduce Heating:

The first step is to stop the further use of the heating system by switching off the thermostat. First, let’s begin by switching off the thermostat by using the switch on the right side of the thermostat which turns the power off. If your model does not have an OFF button, the removal of batteries in the subsequent steps is the equivalent of powering off the model.

Step 2:

Once again, locate the front housing of your iPod and unclip all the rods that are holding it in place. The front housing of most Vivint thermostat models can be clicked or screwed into place when reassembling. Taped at the lower left part of the front cover, this message states, ‘To replace batteries pull out this front cover’. Usually, depending on the kind of toaster, you only have to pull the front part of the toaster gently and it will easily come off. If your is one of the models with visible screws, then you should unscrew those with your Phillips head screwdriver and pull the front housing off.

Step 3:

Old Batteries Have to Be Removed After taking off the front housing, you should see the tray for the AA battery. If required, pull up the battery strap to remove it from the old batteries. Do not handle any wires or any of the circuit board components located underneath the batteries as you are removing them.

Step 4:

People need to replace the batteries of every household appliance Replace new AA alkaline batteries into the battery slots with the polarity symbols (+ and -) of the batteries aligned appropriately with the slot’s marking. On average, the Vivint smart thermostat needs two or three AA batteries that are commonly used. Replace all the batteries at once with new ones at the nearest store that sells batteries.

Step 5:

The front housing of the iPod has to be replaced. After making sure that the new batteries are fitted correctly in the battery compartment slot, fit the thermostat front housing. Place it upright along the base and use a click or screw to fasten it firmly into position.

Step 6:

Turn on the thermostat: Turning on the thermostat means switching on the equipment and the system that is used in regulating the temperatures in a given area. With the unit off, slide the small power switch on the side to the on position to switch the thermostat back on. Try replacing the batteries If the display screen does not light up again after the above steps, then try replacing the batteries.

Step 7:

As for the choice of the date and time for the meeting, it is better to set them depending on the schedule of the participants and the nature of the meeting. You may probably have to enable the thermostat’s date and time again since they are normally reset when the device is without power while the batteries are removed. Check your Vivint’s owner manual to understand how to set the date and time on the specific model you own. Most models have a year, month, day, etc and you use temp arrow buttons to set the numbers, some have a flip lock, and the reset button is the middle button.

Step 8:

Disconnect the device and reconnect it to the WiFi. Furthermore, apart from resetting the clock, you are required to reconnect your thermostat to your home WiFi network. There will be a section on the thermostat’s menu called ‘Settings’ and within the ‘Settings’ the option will be ‘WiFi’. Select your network name and when asked, input the password that has been set for the entire house. This will allow all of the functions in Vivint smart home again.

Step 9:

Return HVAC power to ON If you disconnected your heating and cooling system from the breaker earlier, go back and reconnect it now that you have completed the process. The thermostat should start engaging in temperature regulation as usual now that the batteries are installed.

Step 10:

Test Thermostat Operation Before proceeding with the testing of the thermostat operation, the thermistors should be tested to ensure that they are within the expected range. Reprogram the thermostat by adjusting the temperature up or down for a few degrees to ensure that both heating and cooling functions work correctly with the new batteries. It should start when everything is wired up correctly and working well as soon as you confirm everything after the battery changes in a few minutes.

When you can expect the low battery warnings to appear once again From the article, I noticed that the smart thermostat requires fresh alkaline AA batteries, and with these, your Vivint smart thermostat should last about a year before you’ll need new batteries again. I suggest that you place a reminder on the calendar to check it on an annual basis to ensure the batteries are replaced when necessary.

So, that is how simple it is to replace the batteries on the Vivint thermostat, and now you know how to do it. The low battery indicator light should be used to determine when their replacement is due; this should be done annually. By following this basic battery replacement process, you will ensure that your devices in the Vivint smart home system perform optimally.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!