To change WiFi on ADT Alarm Systems the following are the steps that are followed The first step involved in changing WiFi on ADT Alarm Systems is to get a new router that has been configured from the OEM.

ADT alarm systems are known to be home security systems installed in homes with a high number of homes in the United States. Most of the ADT alarm panels and alarm devices are now connectable to WiFi which allows users to be able to monitor and control the devices from their mobile phones and computers. But, there is a situation in which you may be required to alter the WiFi settings of your ADT alarm system, for instance, when you are using a new router, opt for a different internet service provider, or if you wish to connect to a different network. Switching from an existing WiFi to an ADT alarm is usually not a complex task that you can perform directly from the alarm panel. This article will detail the process of switching between Wi-Fi networks for both the classic blue ADT Command control panel and the modern ADC Command touchscreen control panel.

ADT put out the Original Blue ADT Command Panel to instruct their customers on how to properly use their alarms.

The basic model of ADT Command is a rectangle-shaped panel having a small monochrome text caption and physical buttons. Here are the steps that you can follow if you want to configure the WiFi settings on this alarm panel or to set the wireless option.

One Access the alarm panel’s settings menu by going into your Master Code, followed by pressing the gear-like icon in the Settings label on the screen.

Two, with the arrow keys, navigate to the Settings sub-tab and select WiFi Setup from the list. Press the Select button.

Three You will be required to key in the WPA/WPA2 password of the wireless network from the alarm system. Press the current WiFi password and then hit the select button. This confirms that the device has permission to change the WiFi settings of the phone.

Four An open panel displaying a list of available WiFi networks in the vicinity and the signal strength of each will now appear. Move down to and on the next input field choose the new preferential WiFi network name.

Five There is always the next step of having to type in the password once you are done choosing the new WiFi network. Type the correct SSID for the respective network and then the password using the digital keypad on the panel.

Six Having input the new WiFi password, the panel should show that it is trying to connect to the desired network. It takes several minutes to connect; wait patiently.

Seven If successfully added on to the new WiFi, the panel will expound and you can click on the Back arrow. We have also successfully upgraded the WiFi system. They can also turn away from the Settings menu.

Guidelines for New ADC Command Colour Touchscreen

The most recent alarm systems from ADT include the ADC Command color touchscreen panel. It has a user-friendly graphical interface that makes it simple to switch from one WiFi network to another.

Setting: On the main screen of the ADC Command, tap the gear icon in the right corner of the One tap.

Two On the Settings menu, you find and click the Wi-Fi option to display the Wi-Fi settings options.

Three-click the CURRENT NETWORK name to access a network selection. This will show all the available WiFi networks that are nearby whether secured or unsecured.

Four Scroll down and tap on the name of your new desired Wi-Fi network that you would wish your ADT system to connect to.

A password field will be seen below the network name if five A is typed. Type with the on-screen keyboard to enter the right Wi-Fi password of the selected network.

Six When you are done entering the password then press the connect option at the top of the screen.

Seven The ADC Command panel will enter the new WiFi network connection details in an attempt to connect to the newly created WiFi network. Some of the processes in the recovery console may take up to three minutes to run, so just wait until it is done.

Eight If the changer is successfully done, the name of the newly connected WiFi network will appear at the top of it. After that, press the back arrow at the top of the screen to go back to the settings menu and then go out to the home screen.

Your new WiFi network is now updated in the ADT alarm system on the ADC Command touchscreen panel. To establish connectivity, the user can operate the alarm through the mobile application. Convenience is at the next level as you can now command your ADT home security from the comfort of your home or even when you are on the move.

Conclusion

Resetting ADT alarm panels WiFi is quite easy and can be done swiftly by following the right procedure depending on the type of alarm panel that is installed. Regardless of whether a reader is the owner of the older ADT Command panel or the more modern ADC Command color touchscreen, they have learned in this guide the necessary process of updating WiFi networks. Ensuring that you can link the alarm to a good source of internet is a crucial requirement when it comes to monitoring from a distance. ADT alarm allows you to now alter WiFi at will as your home internet requirements may change from time to time.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!