ADT is among the top and most common home security systems that are widely used now. The security systems can assist in the prevention of a burglar and in addition assist in sending the signal to the homeowner or even the police in cases of fire, or breaking, into your residence. However, it will be very rare that you will be required to reset your ADT alarm system because of some reasons such as blackouts, among others, and changes in some of its settings. Disarming an ADT alarm mostly takes a short time and is something that almost any person can perform. Below are the step-by-step procedures on how to reset the ADT home security alarm system correctly.
Why you may need to reset your ADT alarm:
Power Outage – This is the most common problem with any electrical installation and your ADT alarm system will be affected in the event your home suffers a power outage. If the power has been off for any reason, it is likely that when the power is back you will need to reprogram your alarm panel as well as its parts. The system should go back on automatically or ask you to reboot everything when the power becomes more stable.
Enable/Disable or Modify Settings and Options – Such cases call for the resetting of your ADT alarm if you wish to enable, disable, or modify the features or options that are embedded in the alarm system. For instance, if you would wish to e, dit your alarm contacts and sensors as well as the alarm’s tone. Setting might have been incorrectligured and resetting it can help configure it in the rigthe the ht manner.
TecThe setting issues – It is at this mode where you may only have technical problems with your ADT equipment and when the system is misbehaving, a reset will help in fixing some of the basic software or operating problems. Rebooting frequently cures minor technological issues.
The following process outlines the steps that one needs to follow if he/she wants to reset an ADT alarm system.
Disabling an ADT alarm panel is not a very complicated process and certainly, something that one can accomplish on his or her own. You will just need to follow these steps:
1. Locate the Control Panel
The first step is knowing where to locate your ADT alarm control panel system. This will be an actual physical box that is attached to your wall and has buttons and switches and lights, or a touch screen panel depending on the system model you have. Normally, the main alarm panel should be installed on the wall adjacent to the main entrance of your home.
2. Pull the control panel cover upwards and down to release it.
To open the alarm control box simply unlock or unscrew if there is any screw holding the box closed at the back. This will allow the user to gain access to the factitious panel buttons and choices. In case you have installed a wire-free touchscreen control panel on the wall it means that there will not be a cover to open.
3. Identify the button to switch on the test mode
You should now see some buttons and lights on the panel at the front of your device. Attempt to find out the button with the name Test Mode on the screen. In some systems, it might state Program Mode there instead. It is imperative to put it into a reset status because the special button is important.
4. For this control, users should press the Test Mode Button.
In addition, once you locate the Test Mode button, gently push it until you see the system comes up with some signs that mean it has shifted to the testing or programming mode. In some panels, this will be denoted by the lights while in others, it is done by a message displayed on the panel screen. This particular step is the initiation of the reset process below:
5. Initiate Resetting the System
In this case, depending on the specific ADT panel model and ADT panel system, the necessary steps to clear every component and reset the system remain the same. Most of the time while in Test Mode, there is the Reset or Restore button that needs to be pressed to try and restart the equipment.
On some other models, you might be required to input your Master Passcode or press the number keys according to a sequence mentioned in your user manual to refresh. If the panel is different for your specific model, just follow the instructions according to the panel prompts.
6. Let It Settle While the System Rests
After you have powered the reset for your ADT alarm system, then it is advisable to wait for a few minutes. It takes time for a panel to eliminate previous settings, restart, and reload the standard configurations. Avoid making any interaction with your panel components during the period that the system is rebooting and recalibrating.
7. Please enter the Date and Time back
Usually, you need to input data such as the current date and time type onto your panel each time a reset is performed. Look for any on-screen prompts to enter the correct date This effectively cascades all the equipment and brings all of them to an agreed baseline setting.
8. Exit Test or Program Mode denotes a state Exit Test has been passed, and the Program Mode
The last process is to remove the ADT equipment from the time setting Test or Program Mode that was set during the reset procedure. To activate the panel again, simply locate and press the Test Mode button more time, to apply new settings and turn the panel back to active alarm status. If you are on a particular system, then there are chances that you will have to log in again by providing your passcode.
Conclusion
Programming an ADT home security alarm system is making changes to the settings that solve, updating the current settings, and making correct work involves previous problems. You just have to find the controupdatingl box of the system, clickmakingTest Mode, initiate a system reset message, watch as the equipment reactivates, and renew the test mode by clicking on it. In conclusion, as long as the instructions given above are carefully observed, it only takes a few minutes to reset your ADT alarm. You may need to make some adjustments to the process above if your model has been altered in some way; refer to your owner guide for diet adjustments.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
