Part one – how to reset your Vivint panel Amlung Vivint. com A home security and smart home provider that offers cameras, door locks, thermostats, and control panels for the home. The main Vivint control panel is the primary system hub that links to other work elements and sensors of the Vivint system.

Like any other electronic device, the Vivint panel can develop some challenges or freeze that enable the panel to be reset so that it can work properly. Restorative reboots help in erasing any momentary hitches that may be affecting the functioning of the system. It is a rudimentary repair if not for the fact that it is one of the initial steps towards repairing a more complex issue. However, it is possible to reset a Vivint panel and this only requires a few steps to complete.

  1. Inform the monitoring company – If you have any Vivint professional monitoring to send authorities to your home, dial the company and inform them that you intend to reset your panel. This prevents false alarms.
  2. Obtain reset code – You will require your 4-digit Master PIN code for resetting the Vivint control panel. This is the same homeowner code that you use to mainly switch off the system at home most probably each morning. Indeed, if the reset code is lost, then the process of reset can’t be completed.
  3. Called all connections – Ensure that all the cables that connect all the Vivint system components and sensors are tightly connected. This can be displaced by resetting since it interferes with the other connections that are not strong.
  4. Reset option – At the lower left corner of the Vivint panel there is a small pinhole where the “Reset” word is engraved. This button reboots the device, and no more buttons are available on this screen.
  5. Reset the game – Turn off the computer then turn it back on, another way is to press the reset button of the game where you find a small hole, use the tip of a paper clip or pen, and press the button for 1-2 seconds. As indicated, every time you press the panel, the inside reset takes place and the panel will look as if it is not functioning.
  6. Please enter the Master PIN code again - The Vivint logo will return to the touch panel with a message asking you to re-enter the 4-digit Master PIN code after about 20 seconds. This restarts and finalizes the restart.
  7. Wait for the panel reset – This process may take 2-3 minutes until the panel resets completely, especially when it is the Vivint panel you are dealing with. You get to see the panel and the initial loading screens as the panel tries to reload at this time.
  8. Reconnect sensors - Your system sensors and components need to first connect with the panel after the reboot process. Door, motion, smoke, and other wireless will reconnect with the panel within 3-5 minutes in most incidences.
  9. Test reset functionality – With a clear, fresh mind, move around your home and set off a few sensors and cameras to confirm that the alerts are being sent to the newly reset panel and the Vivint app. The program should now be able to perform all its tasks as expected.
  • It is the keypad; the whole thing is just like a block of ice with no sign of life on it.
  • Messages that you cannot get rid of, they stay on the screen
  • Frequent disconnections from the sensors or other equipment
  • Some of the commands such as disarming the alarm system do not function
  • When it comes to system alerts and notifications, a lot of time is taken.

However, before restarting because of one of those issues, attempt to reboot the panel by briefly disconnecting the power cord and then reconnecting it after about ten seconds. If the issues persist, then follow the full panel reset procedure. Yes, it is, but if the issues are still there, then perform the full panel reset.

Vivint Panel Tips some additional useful tips for getting the most out of your Vivint control panel: 

  • It is recommended to clean the screen more softly with a microfiber cloth and water from time to time to avoid the appearance of any marks on the screen.
  • If they have any difficulty hearing alerts, they should change the keypad chimes to a higher pitch.
  • Position your panel far from the heater or air conditioning vents, as well as direct sunlight to minimize efficiency loss due to heat or cold.
  • Vivint Smart Hub can provide customizable panel control directly from the mobile device.

One of the most effective ways to fix problems with your Vivint smart home monitoring control panel is by resetting the system’s control panel; this is a rather simple process that can be completed in a short amount of time. You just need to find a small reset button, press it for 1-2 seconds, then re-enter your Master PIN when it asks for 20 seconds after you stop pressing it, and let the panel wait for 2-5 minutes to reboot to 100% on its own. This is because resetting the disc-eraser only if necessary helps to maintain the security of your system and reduce disruptions.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!