Alarm systems are very important in the security of homes, and this is why it is recommended that every homeowner should install an ADT alarm system in his or her home The first thing that one should do before leaving the house is set the alarm.

Intro paragraph: It is a prominent company that specializes in Home Security System technologies and products in the United States of America. Their security systems can assist prevent intruders from getting into your house while you are out or during the night, and will also notify you and the authorities if there has been a break-in. Proper usage of the ADT alarm by setting it each time you leave is crucial to effectively harness the full capability of the system and achieve the best security experience. Check out this simple instructional video that will teach you everything you need to know to correctly arm your ADT home security system before you leave your house.

Before Setting the Alarm The first measure that needs to be taken is to shut all the doors and windows that lead in and out of the particular room or house. The first procedure involves ensuring that all the doors and windows in your home are securely locked before activating the alarm. Go around your home and double-lock every outside door and window to ensure they are closed and locked securely. This is identified by the alarm sensors that are there to sense any opening of the doors or windows of the house and when the system is armed the alarm is triggered.

Step 2: Disengage any indoor motion detectors if needed. It is also important to note that some ADT alarm systems have interior motion detectors in addition to perimeter sensors. If you have pets that stay indoors, or you are going to have any movements inside due to any other reason while you are away, ensure that you switch off all indoor motion detectors so that they do not cause the alarm to be triggered. Go to your ADT control panel or ADT mobile app to determine if you have interior motion detectors and how to shut them off if necessary.

This segment of the book will set the ADT Alarm System. It’s now time to officially prepare your system before leaving the house after the preliminary things are accomplished. Here are the step-by-step instructions for properly setting the alarm from inside your home: Here are the step-by-step instructions for properly setting the alarm from inside your home:

Master Alarm website Step 1: You have to type your Master Alarm Code Before you can arm any of the ADT alarm systems, the first step that you need to take is to key in the master code into the control panel keypad. This is the master code that you may have set up when installing your alarm system for the first time, ranging from four or six digits. Sent properly gets the system into an ‘Armed’ state which when you leave the home, all the sensors are on to detect intrusion.

Step 2: Understanding Your Desired Arming Mode Most ADT alarm systems provide you with two main arming mode options: Most ADT alarm systems provide you with two main arming mode options:

Vacation mode – activate all the perimeter sensors to alert of intrusions within the entire enclosure during your absence. This is the mode to use when leaving the home entirely out of sight or leaving for a long time like going for a holiday.

Sleep mode – the only sensors to activate are the perimeter ones on the lower floor of the home so you can ‘set’ the system when you go up to bed. Any activity at the ground level will still cause an alarm.

Lock the doors and open the panel on the ADT keypad by punching in your master code, you will then choose the required arming mode depending on the circumstances, either Away or Stay. The system will confirm readiness in your selected mode with a verbal beeping sound when armed.

Step 3: Open/Close Designated Entry/Exit Door Normally when people are going into a restricted area or room in a facility, there has to be a door they use to enter and another that is used when exiting the area or room. The exit channel is the last phase, which involves leaving the home within the proper timeframe through the identified PEEVD. This is typically your entry, exit door, back door, or garage door that you close/open when you are getting in or out of the home.

ADT security system will allow an exit delay period countdown you around 30-60 seconds to leave safely, otherwise, the alarm will trigger. It is important not to remain in front of the door you unlocked for your exit once you open your designated exit door to get out – ensure it is either shut behind you or you leave the home and shut the door before the countdown begins. In the current scenario, if the door does not close in time, or if it is opened during the exit time delay, it can cause unwanted alarms.

Expectations When Deciding to Arm System

  • This is part of the audio feedback that the keypad will beep and also give voice prompts during the arming process to indicate that the ADT system is well set.
  • A spoken word countdown timer will inform you of the number of seconds left before the door opens again to safely exit through your assigned door in the house.
  • Automatic movement sensors are installed to give the final 5-minute countdown to the occupants that require additional time to get out.
  • Voices capabilities enable the ADT monitoring center to verbally inform whether the alarm has been triggered by accident therefore allowing you to safely deactivate the system again.

If the panic signal was triggered by mistake, what should be done? However, it is possible at times to get false alarms even if all measures are being taken when arming the house through a door or a window. 

  • STAY IN THE HOME: Do not go out. Remain inside.
  • If there is an intrusion, the ADT monitoring center will also verbally request your password aloud through the alarm speakers.
  • For emphasis, you need to clearly announce your verbal duress password to notify you and avoid triggering the emergency dispatch.
  • You can access the instructions on how to disable the alarm through the keypad: type in the master code one more time to turn the system off.
  • Attempt to arm the system once again with more practice and proper techniques.
  • Contact ADT support if problems still exist and ask for an emergency dispatch if it was previously ordered.

VPNs provide that peace of mind especially when you are away from home. ADT home security system tips When you arm your ADT alarm system for a way, following this guide will assist in preventing any kind of issues or false alarms as you leave your home. Slow, ensure all doors or windows in the room are closed, if needed turn off all interior motion detectors, choose the right arming mode, then always know which door is the one to open/lock as per instructions. That’s why the ADT monitoring professionals are there in case any questions or complications arise. Just as you deserve the break of your choice, you can trust that your home and your loved ones are well-secured.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!