ADT is among the top, reliable home security companies in the United States of America. If for instance, you have an ADT alarm system at your home, there could be times when you feel that you need to disable it for some time or at least for a few hours, maybe because you are expecting visitors to your house or contractors who are working at the house while you are at a different location. Some of the prior ADT systems had keypads on which one was able to punch in a code to disarm the system, but most of the new ADT systems are operated by wireless keyless fobs.
You will find the correct sequence and simple set of steps that will enable you to easily learn how to disable the ADT alarm system using your key fob.
In this guide, I will explain what to do before you turn off the ADT alarm system so you can be sure that your home is secure before disabling it. Finally, ensure that you have permission to log into the ADT alarm system. If you are not sure, contact the person who has the primary account. They are the only ones who can add other users or more key fobs to the ADT account.
Additionally, you have to understand that when you activate the key fob to switch off the ADT alarm temporarily, the outer coverage such as a door or window sensors will also turn off. Other interior protection such as motion sensors too get switched off if the system is switched off. This helps in that you are not alerted each time there is an alert from a neighbor or any other person if, for instance, you are expecting a delivery at home. They enable other individuals to open and close the doors of your home without triggering the outside sensors or alarms. So it is advised to switch off the ADT system only when you are at home with your visitors.
Also when the system is in the off state for some time, it will take some time before all the sensors are active when you switch the system on again. This will allow you to leave your home without activating the alarm by default. The exit delay, which you probably know, is typically about 60 seconds, but might differ on your system.
Withdrawing the Protection Offered by Your ADT Alarm Using a Key Fob If your ADT system signal is through wireless key fobs then turning on or off the ADT system is a breeze. For every user, that you sign with ADT, they are likely to provide you with labeled key fobs. Here’s how to use your key fob to temporarily disable the system: Here’s how to use your key fob to temporarily disable the system:
Step 1. To carry out the next steps in the process, first find your assigned ADT key fob. A key fob is a small electronic device on a plastic base usually with batteries to operate a vehicle’s lock and is usually attached to a key chain. They will have words on the buttons – make sure you find one that has the word ‘secure’ on it or one that has a button with a lock on it. This little padlock button here is responsible for the power on and power off of your system. The newer model fobs may even have On/Off written below this padlock sign.
Step 2. They should be in a position where they are within 30 feet distance from the main ADT control panel. This control panel hub is what sends out signals to the key fobs and all the security sensors in your system via either WiFi or cellular communication. These are usually placed in the central parts of homes and would have the word ADT inscribed on them, together with LED light indications if the system is active.
Step 3. For most key fobs, simply press the On/Off padlock button on your key fob once; however, for some key fobs, you must hold the On/Off padlock button for 1 to 2 seconds. ADT uses a central panel to monitor your home, and you should set up your system to emit beeping noises when there is an issue. In most systems, one beep will alert the system that it is booting up as well as shutting down. Three short triple-toned beeps or a different pattern of flashing lights indicate that something is wrong and it remains armed.
Step 4. The green LED status lights on your ADT control panel should also change when you successfully disarm the system using the key fob you were provided. For instance, if the “Armed” light turns to “Off” or “Disarmed,” one has made it possible to disable the security sensors and surveillance of a particular system through the key fob.
Step 5. As a verification, you can attempt to open one of the protected doors or windows for a few seconds while the system is in the disarmed state. If the alarm is still not making a sound, your ADT security is disabled until you switch it on using the key fob. You just need to press and hold down on the padlock icon once again until your system beeps or flashes which means that the security sensors have been enabled.
The first thing to do if the key fob malfunctions is to stop using it and consult your car manual. Assuming that your key fob fails to disarm your ADT system, then there are few other options but to troubleshoot the key fob. To begin with, try to use an extra key fob that is associated with the ADT account to determine whether or not you can shut the system down. If that spare fob runs well, then the issue is with the keyless fob you had initially.
Most of the problems experienced with the ADT key fobs are due to the low battery, interference, or damaged hardware. Here are some tips:
Remove batteries inside the nonworking key fob and make sure that they have not drained out, and if they have then replace them with new batteries if needed. The batteries in the key fobs may die and because they are not dependent on any mechanical switch they could do so at any time. Ensure to remain within the 30-foot range and must be in direct view of the ADT control panel hub while using the key fob buttons. They include the following; When the following conditions are present, they hinder the wireless signal from working properly. Check whether the key fob has cracks, has dropped, or was exposed to water since these will cause corrosion of the sensitive internal circuits. If it is damaged, then it is better to re-order it again. If issues are not resolved, contact Customer Support for the next steps regarding the key fob or any other issues with your system.
Summary Getting an ADT-monitored security system is beneficial in helping homeowners get the much-needed relief. And even though one does not care to have home protection from burglaries or alarms, it is relevant to have basic system control for individuals as well as visitors. ADT alarm sensors are important in the house and it is very important to know how to turn off the alarm sensors with the Wireless key fob. You will no longer feel a sense of panic each time home deliveries are made when you are not at home or workers do home maintenance that requires entry into the home. Just arm and disarm the ADT system as needed with the dedicated on-off padlock button following these 5 simple steps: Just arm and disarm the ADT system as needed with the dedicated on-off padlock button following these 5 simple steps:
- You should be able to identify your assigned ADT key fob
- Approach within 30 feet from the main Fire Alarm Control Unit
- Press and hold the padlock button for 1 to 2 seconds. Repeat the process to unlock the padlock
- Make sure the Disarmed LED light turns on the panel
- Test by opening the protected entry point for a few seconds.
Therefore, have guests or receive packages without worries knowing that with one Key fob press, the monitoring can be disabled or reactivated as deemed necessary. Discharge wireless commands of your home security if wireless disarm commands do not immediately disarm your home security, call ADT support.
