Going to bed with the thought that some alarm clock will wake you up in the morning is not a good thing. Though alarms are needed to ensure that we wake up early, there are times when we would like to continue sleeping or when the alarm is a false alarm. It is good to learn the different ways through which one can switch off the alarms such as the phone, bedside clock, or even a home alarm system since this is a way of regaining control of the surroundings. This article will take you through how to get up for an early morning alarm and how to deal with an alarm at the time of an emergency.

Turning Off Phone Alarms

Most of us get up in the morning using our cell phones as the main tool. It is rather handy to know how to turn off the ringer on the phone, however, should there be circumstances requiring you to get up a bit earlier than normal. Pressing the volume up or down button on the side of the phone will silence the sound but not turn off the alert. If you have many alarms set, just altering the volume will have other alarms still active to sound.

To completely disable a phone alarm:

Enter your password, draw the correct pattern, or use Touch ID/Face ID to unlock your Smartphone's screen. This brings you to the main home page from where you can carry on running your company. Find the Clock app, which ought to be on your desktop or in a folder including utilities. Pressing the alerts icon at the bottom of the page shows all the alerts you have configured. Moving the alarm's switch from the On to the Off position can help you disable a particular alarm. The row will be muted to indicate its disablement. Proceed similarly for any additional alarms you want to disable. This turns off the alarm and simultaneously sets it to go off once again the next morning.

If the phone alarm is very loud or continuous even after pressing the volume buttons, one can go for full shutdown. Hold the Side or Power button and then swipe right to reach the Power off menu. Slide the slider to fully power the phone off. Know this halts everything so you will not get any ring or notification until it is active again.

Stopping Bedside Alarm Clocks

Timepieces with bells or radio alarm functions are also disruptive early in the morning. Depending on the type of bedside alarm clock, there are typically a few methods of turning off alarms. Sleep and on/off buttons are quite prevalent.

Usually, this button is placed on the top of the clock, push it to get 5 or any other extra minutes before the alarm continues its ringing. Repeat as needed. Press the Power or Alarm Off button red octagonal buttons are common to turn the alarm off to the fullest. It will explode at the same time the following day. Twist the volume knob clockwise until it shuts off the sounds without switching off fully. This is more extreme but it entails disconnecting the clock from power which ensures that no alarm can go off. Turn the clock face down so that the alarm rings on the table this minimizes the sound. Laying a pillow over it can also do the trick. Just don't accidentally knock it onto the floor.

Again, if your clock has the feature of battery backup, the batteries may need to be ejected to effectively switch off alarms in some models. Just ensure you open the case gently and replace the batteries so that it has the right time when powered back on.

Switching off Home and Business Security Alarms

Every home and business has a Home Security System that has very loud beeps or alarming sounds connected to motion detectors, smoke detectors, breach detectors, and others; once any of these alarms is activated, it rings until it is reset. As for the ways to stop security alarms, there are several depending on the category of security alarms in consideration.

By using the connected keypad, input your security code. Central home pads located close to exterior doors enable you to input a numeric PIN which informs the system to switch off. Press the Disarm button when you are on the control panel. Larger security systems have central control boxes inside the building and also the wiring security is found here. Find the interface and press Disarm. Call your security provider. Many monitored security systems will entail contacting the third-party provider if an alarm is triggered when you are out of your house. Tell them your password or PIN to silence alarms from a distance. Remove the batteries. In the case of standalone battery-operated alarms for instance smoke detectors, the batteries should be removed to switch off the alarm or alert. Replace batteries immediately to continue having protection.

For instance, to turn off home and business security systems, one must have the correct code or key. This is unlawful and decreases security; never try to remove or disable sensors or alarms. Locks and codes should be secured and only given to people who may be required to switch off the system during an emergency.

Stay in Control

Everyone fumes when they are woken up by loud annoying alarms first thing in the morning or when perhaps they need to rest. But they also have a role in guarding assets sending notifications visiting senior citizens and other uses. Knowing how to shut off alarms means regaining some measure of control when you require some quiet time. Search for power buttons, Snooze options, and codes on your different devices. Tuck instructions like this article and avoid having a day spoiled by annoying alarms when you just need more sleep.

Protect your home today with ADT’s top-rated security solutions!

Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!